Vibratory Separator
The AQ-450Y series adopts a sealed design, the discharge port is rounded, and the stainless steel upper cover is used for sealing, so that the dust caused during the screening process is minimized and the working environment is kept clean. The contact material part is made of stainless steel SUS304#, and the base is made of general steel SS41.
| Motor (HP) |
Voltage |
Frequency (Hz) |
Size(mm) |
Net wt. (kg) |
| 1/2 HP |
110/220 |
50/60 |
450 X 510 X 670 |
38 kg |
Feature
♦ The placement location can be changed at will, and it is convenient to move.
♦ Replace the time of manual screening and save manpower.
♦ High screening accuracy, high efficiency, applicable to any powder, granule and slurry
♦ Unique screen structure, convenient and quick to change the screen, only 3~5 minutes, simple operation and convenient cleaning.
♦ No mechanical action, simple maintenance, single screen design, all parts in contact with materials are made of stainless steel.
♦ Easy to install without taking up space.
Notice
♦ Check whether the form and specification you ordered are consistent, and whether the prepared voltage is consistent with the nameplate mark (voltage error ± 5%).
♦ The power switch (knife switch is not available) should be in good contact, and it is strictly forbidden to run the motor without phase Avoid burning the motor.
♦ The machine should be placed at a minimum distance of 500mm from the surroundings to avoid collision.
♦It is strictly forbidden to clean the motor with water during cleaning to prevent electric leakage.
♦To keep the screen clean, you can use the corresponding cleaning agent according to the filter material. At the same time, the screen is strictly forbidden to collide with sharp and hard objects. When cleaning the screen, stop the machine before cleaning.
♦If abnormal sound occurs during use, please stop and inspect immediately.
