Vibratory Separator
The experimental screen AQ-200K is a special model for material particle size screening and analysis. The multi-layer mesh can screen 4 to 6 different particle sizes. It is suitable for major research units and industries that require a small amount of screening. The base and fixing rod are made of stainless steel SUS304#.
| Motor (HP) |
Voltage |
Frequency (Hz) |
Size(mm) |
Net wt. (kg) |
| 1/4 HP |
110/220 |
50/60 |
350X410X770 |
25 kg |
Feature
♦ Automatic time control to improve work efficiency.
♦ The net layer can be heightened freely, up to 6 layers.
♦ Replace the time of manual screening and save manpower.
♦ High screening accuracy, high efficiency, applicable to any powder, granule and slurry
♦ No mechanical action, simple maintenance, single screen design, all parts in contact with materials are made of stainless steel.
♦ Easy to install without taking up space.
Notice
♦ Check whether the form and specification you ordered are consistent, and whether the prepared voltage is consistent with the nameplate mark (voltage error ± 5%).
♦ The power switch (knife switch is not available) should be in good contact, and it is strictly forbidden to run the motor without phase Avoid burning the motor.
♦ The machine should be placed at a minimum distance of 500mm from the surroundings to avoid collision.
♦ It is strictly forbidden to clean the motor with water during cleaning to prevent electric leakage.
♦ To keep the screen clean, you can use the corresponding cleaning agent according to the filter material. At the same time, the screen is strictly forbidden to collide with sharp and hard objects. When cleaning the screen, stop the machine before cleaning.
♦ If abnormal sound occurs during use, please stop and inspect immediately.
